|
PC 0322 GAUGE STAND SUPPORT
WITH MICROMETRIC ADJUSTMENT
Complete gauge stand support composed by black granite base mm 300x200x50 lapped grade 0, with ø 35 x 300 mm column,
aluminium slider; micrometric adjustment.
(Dial gauge not supplied)
|
|
PC 0317
GAUGE STAND SUPPORT
WITH SMOOTH COLUMN
Adjustable arm set composed by a stainless steel column ø 20 H 220 mm, stainless
steel arm ø 16 mm, cursor with separate screw stop for arm and column, fine adjustment,
gauge attachment ø 8H7 mm, screw for attachment to the base
(Art. PC 0319/0320) (Dial gauge not supplied) |
|
PC 0318 GAUGE STAND SUPPORT
WITH THREADED COLUMN
Adjustable arm set, with threaded column composed by: stainless steel threaded column,
ø 35 H 330 mm, nut for vertical movement, stainless steel arm ø 20 mm, cursor with separate
screw stops for column and arm, fine adjustment, gauge attachment ø 8H7 mm, screws for
attachment to the base.
(Art. PC 0319/0320)
(Dial gauge not supplied) |
|
PC 0319
GRANITE BASE 250 X 160 X 40 mm GR.1
Base for gauge stand, size 250x160x40; upper face lapped grade 1,
with hole for column and rubber feet.
PC 0320
GRANITE BASE MM 300 X 200 X 50 GR.1
Base for gauge stand, size 300x200x50; upper face lapped grade 1,
with hole for column and rubber feet.
|
Test Report included
Different size and tolerances on request
|
PC 0315 - Lino -
Vacuum Gauge Stand Support
Device composed by an angle base made in aluminium strength anodise alloy.
Each unit consists of an air bearing, fixed to the sliding surface plate through a
pneumatic vacuum action. On the base is located a nimble arm for gauge stand with 8H7 hole for standard gauges suitable. It is possible to assemble the two elements of the base for a guided length side sliding or use the upper unit only for the free sliding onto the surface plate. You can independently switch on and off pressure and
vacuum by acting on the four valves.
Provided with pneumatic station, the stand support is extensively used on granite surface plates with one or more lapped faces. Adjustable "L"-base according to different sliding sides.
(FEEDING DEVICE: COMPRESSED AIR 4 BAR / CONSUMPTION 30 l/min ).
|
(Dial gauge not supplied) |
|
