Black Granite Test benches with crosspoints

BC: CONCENTRICITY TEST BENCH

Composed by a pair of cross-points (CP) and a black granite base of a reduced width, lapped at grade 1 and a central T-slot mm 16H8; 3 adjustable feet.

CP: PAIR OF CROSS POINTS FOR
CONCENTRICITY TEST BENCH

MEEHANITE WA structure standardised anti-wear.

Steel tube in cemented Ni-Cr.
Points with attachment C.M.2.
Parallelism between the axis point and the base 0,01 mm.
Point alignment ± 0,01 mm.
Overall dimension: 350 mm.
Key 16 mm..

HV0525: HORIZONTAL AND VERTICAL
CONCENTRICITY TEST BENCH

Composed by a black granite single block shaped to lodge two stainless steel points aligned with the «V»; the «V» axis is parallel to the base. You can place the bench in horizontal position through the handle fixed on one head, perpendicular to the axises of the points.

On request, other sizes are supplied.

BB0530: CONCENTRICITY TEST BENCH
WITH SINE BAR

Similar to the «HV Bench» for the upper side, then with the seats for the sine bar lodgement,
placed at 300 mm. For the testing of taped elements, by using little test blocks, you get some angles between the base and the axis of the points.

On request, other sizes are supplied.